2024-09-13
Use grooved flexible and rollable wood panel board (Tambour board) to make a Tambour door:
柔軟でロール可能な木製パネルボード(タンブールボード)の仕様書
柔軟な溝付き半円形無垢材またはMDF木材スティック壁パネルボード
木材の種類:無垢のアカガシ、MDFボード
サイズ:4フィート x 8フィート(1200 mm x 2400 mm)
高さ:6mm
半円棒:18mm 幅
バッキング:ECO樹脂強化不織布バッキング
原産地:台湾製
木製の突板天板を備えた柔軟なV字溝入り木製スラット壁パネルボード
木材の種類:オーク、メイプル、チェリー、およびMDFボード
サイズ:4フィート × 8フィート(1200mm × 2400mm)
厚さ:3mm
V溝付きのフラットスラット: 13mm、43mm、67mm、その他特注の幅
構造: 上層木材ベニヤ、中間層 MDF ボード、下層 ECO 樹脂強化不織布裏地またはクラフト紙
Usages: Interior pole wraps and column covering, wood wall paneling, ceiling, furniture surface covers, flooring, wainscoting, Tambour door, V-grooved flexible wood panel board, Tambour board, MDF board, wood veneer, Rollable wood panel board, flexible and rollable wood panel board, DIY
原産地:台湾製
The best Tambour boards, V-grooved Flexible wood panel boards in three layers, top in selected wood veneer, middle MDF board and back with textile support then V-grooved or fluted on the upper two layers for the flexible and rollable character and with wood slats design will be the best selection for this Tambour door material.
上層が選択された木の薄板で、中間層がMDFボードで、裏側がテキスタイルで補強された3層の柔軟な木製パネルボード(タンブールボード)は、高い柔軟性、巻きやすさ、耐久性を備えており、常にタンブール扉製作の第一選択です。
Flexible and rollable wood panel board (Tambour board) making a Tambour door:
必要な材料:
- V字型の溝の入った柔軟な木製パネルボード(タンブールボード)
- タンブールドアトラックシステム(ローラーとガイド)
- 木工用の接着剤または粘着剤
- 鋸
- 測定テープ
- ドライバー
- すながみ
- 仕上げ(塗料、染料、またはワニス)
ステップ:
- Measure and Cut: Measure the height and width of the opening where you want to install the Tambour door. Use a saw to cut the V-grooved flexible wood panel board (Tambour board) to the required dimensions. Make sure the cut edges are smooth.
- Prepare Track System: Install the Tambour door track system according to the manufacturer’s instructions. This will involve attaching the rollers and guides to the top and bottom of the opening.
- Apply Adhesive: Apply wood glue or adhesive to the backside of the V-grooved flexible wood panel board (Tambour board). Make sure to spread the adhesive evenly.
- Insert into Track: Carefully insert one end of the
- V-grooved flexible wood panel board (Tambour board) into the track system at the bottom of the opening. Gently bend the V-grooved flexible wood panel board (Tambour board) and guide it into the track at the top. Slowly slide the V-grooved flexible wood panel board (Tambour board) into the track, making sure it moves smoothly.
- Test and Adjust: Roll the Tambour door up and down a few times to test its movement. Make any necessary adjustments to ensure that the door operates smoothly within the track.
- Trim if Needed: If the V-grooved flexible wood panel board (Tambour board) is slightly wider than the opening, you may need to trim the sides using a saw to ensure a perfect fit.
- Finishing: Sand the edges and surfaces of the Tambour door to achieve a smooth finish. Apply your chosen finish, such as paint, stain, or varnish, according to the manufacturer’s instructions. Allow the finish to dry completely before proceeding.
- Final Installation: Once the finish is dry, carefully slide the Tambour door back into the track system. Ensure that it moves freely and smoothly along the track.
- Hardware Installation: Depending on the design, you may need to attach handles or knobs to the Tambour door for easy operation.
- Test and Adjust Again: Roll the Tambour door up and down several times to ensure that it operates smoothly. Make any final adjustments as needed.
Congratulations, you’ve successfully created a Tambour door using the V-grooved flexible and rollable wood panel board (Tambour board).
キーワード タンブールドア V-grooved flexible wood panel board, Tambour board, MDF board, wood veneer, Rollable wood panel board, flexible and rollable wood panel board, DIY