2024-10-12
Non-interlock assembled system engineered hardwood flooring and solid hardwood flooring
Engineered hardwood flooring can be an excellent option for homeowners that are looking for sleek hardwood floors, but are on a tight project budget. This type of hardwood flooring is typically cheaper to purchase and install. Let us compare the Engineered Hardwood Flooring and Solid Hardwood Flooring, including advantages and cost.
Engineered Hardwood Flooring vs. Solid Hardwood Flooring Cost and advantages
Generally, engineered hardwood flooring is less expensive than solid hardwood flooring.
Engineered hardwood flooring is made of several sheets of high quality MDF or plywood with a few top layers of natural wood, such as maple, oak, or cherry woods.
By only using natural wood for the top layers, manufacturers can sell this product for less than solid hardwood. This design allows the hardwood to be installed below grade, in basements, or even over concrete sub floors. However, engineered hardwood doesn’t last as long and has limited resurfacing options.
Solid hardwood flooring is completely made up of natural wood.
This composition results in a high-quality products that is long-lasting, durable, and aesthetically appealing. However, solid hardwood flooring costs more than engineered hardwood flooring and it cannot be installed in below-grade locations. Solid hardwood is susceptible to moisture, so if it’s put in the basement or installed over a concrete subfloor, it can absorb the moisture in the area, leading to swelling and buckling.
Engineered Hardwood Flooring vs. Solid Hardwood Flooring Cost
Engineered Hardwood Flooring Cost Factors:
Room Size:
Generally, the larger the room, the more time and materials it will take to complete the job, leading to increased costs.
This estimate includes both the cost of material and the labor involved with the installation. However, the price of the job may increase depending on the wood species, wood quality, the flooring width, and the flooring thickness.
Flooring Width and Thickness:
Larger planks will cost more to purchase, though they may not take as much time to install, leading to small labor cost savings. Typically, engineered hardwood planks measure no more than five inches in width. However, there are wide format planks.
Another factor to consider is the thickness of the engineered hardwood planks:
Generally, you will be able to find engineered hardwood in 3/4-inch, 5/16-inch, and 7/8-inch thicknesses. The thicker the planks, the higher the cost of the material.
Labor cost of Engineered Hardwood Flooring:
Typically, labor costs for installing an engineered hardwood floor range. Labor rates can vary between companies and may also fluctuate depending on the location of the home.
It’s a good idea to look into several reputable hardwood flooring installation companies in order to compare installation costs and timelines. However, if the job is larger or more complex than the average flooring project, the labor cost may increase.
If looking for lower labor cost and convenience installing by DIY without professional flooring installation companies, you may choose the new NON-INTERLOCK ASSEMBLED FLOORING SYSTEM Engineered hardwood flooring in large 4′ x 8′ size and with support textile backing. The present invention relates to a flooring system, and more particularly relates to a non-interlock assembled flooring system which is easy to be installed, stored and transported which offer a quick and easy installation by DIY. This DIY project, large size flooring paneling and easy installing process low down a lot of labor cost.
Tree Species:
Engineered hardwood is generally made using several layers of high-quality MDF or plywood with a few top layers of natural wood. The cost of the material can increase depending on which type of wood you choose for the project.
Bamboo hardwood is a relatively inexpensive option that is both durable and resistant to termites and other pests.
Brazilian walnut isn’t a common choice, though it does have a high level of durability and a rich color that can improve the aesthetic of the home.
Cherry boasts a rich color and soft texture, and a great choice if the primary concern is appearance.
Cypress is another unfamiliar option for hardwood flooring.
Hickory comes in several color variations. The wood has a high hardness and density that is durable, but may require area rugs for underfoot comfort.
Mahogany is one of the more costly choices. If the price doesn’t present too much of a problem, this wood is a great aesthetic option with a dark, rich color that ages well.
Maple is a good choice for high-traffic areas of the home, like the living room, family room, or front hall.
Pine is the least expensive option, however, this wood is also prone to dents and difficult to refinish due to its soft density.
Red oak is known for the high durability and attractive color, making it a more reasonably priced material option.
Teak is a very hard wood with a high level of durability. It’s scratch-resistant and long-lasting, but it’s also one of the most expensive material options.
White ash has a light color that looks good in well-lit areas of the home.
White oak is similar to red oak, but has a lighter color and is slightly more water-resistant, making it a good option for a front entryway. This type of hardwood costs just a bit more than red oak.
Wood Grade:
The wood grade can differ between products, which can affect the quality, durability, and cost of the engineered hardwood flooring. Generally, engineered hardwood can be separated into three wood grades, including basic, mid-grade, and top-quality.
Basic engineered hardwood flooring typically features three core layers with a thin veneer that ranges from about 1/16-inch to 1/12-inch in thickness.
Mid-grade engineered hardwood flooring costs a bit more, this type of flooring has a thicker core and thicker veneer layers for increased durability.
Top-quality engineered hardwood flooring is the higher durable and the most expensive wood grade. This type of wood may have as many as seven core layers and the veneer can be 1/6-inch or thicker.
Best-quality engineered hardwood flooring is the highest durable and the most convenience wood grade. This type of wood non-interlock assembled engineered flooring system. This new developed engineered hardwood flooring structured with three layers, the top layer hardwood veneer, middle layer MDF of ply-board, bottom layer ECO resin reinforced non-woven fabric backing. The top and middle layers be pre-grooved with slats lines design but still connect with bottom backing support textile to get flexible character and reinforced strong support strength.
Finish and Coating:
After installing the engineered hardwood flooring, it’s a good idea to apply a protective coating to help prevent the floor from getting scratched or dented. This finish increases the durability of the engineered hardwood and reduces the risk of damage. Typically, finishing a previously unfinished engineered hardwood floor. However, some engineered hardwood comes pre-finished, though these products, generally cost about $2 extra per square foot.
Floor Joist Repairs:
If the floor joists show signs of mold growth, insect activity, or water damage, then the installer may recommend repairing the joists before installing the hardwood flooring. This repair project will typically add about $2,000 to $5,000 to the overall cost of the project, but is essential for ensuring that the floor will not buckle or collapse while in use.
Specification sheet of NON-INTERLOCK ASSEMBLED FLOORING SYSTEM engineered hardwood flooring
Hardwood veneer top flexible V-grooved wood slats flooring, wall and ceiling paneling boards
Types de bois : Chêne, Érable, Cerisier, Panneau MDF
Taille : 4 pieds x 8 pieds (1200 mm x 2400 mm)
Épaisseur : 3 mm
Flat slat gap width V-grooved: 13 mm, 43 mm, 67 mm and other widths available in special orders
Structure: Top Layer Hardwood veneer, Middle Layer MDF board, Bottom Layer ECO resin reinforced non-woven fabric backing
Usages: flooring, engineering wooden flooring, wood wall paneling, ceiling paneling, wainscoting, shiplap wall paneling and backsplash,
Origine : Fabriqué à Taïwan
Chaque planche de bois est sélectionnée à la main et poncée pour vous assurer de recevoir la meilleure qualité de panneau de bois pour des lattes et des bâtons sur un panneau de bois flexible à rainures. Le panneau de bois flexible peut se plier au niveau des rainures des lattes ou des bâtons pour permettre des applications courbées.
Key words: Engineered hardwood flooring, Engineered wood flooring, solid hardwood flooring, wood wall paneling, ceiling paneling, wainscoting