Flexible wood panel boards for wall covering, pole wraps, Wooden Coasters, Rollable Menus, Cosmetic Cases, Decorative Placemats, Laptop Stands, Picture Frames, Storage Boxes, Plant Pot Holders, Jewelry Displays

2024-09-12

Flexible wood panel boards with V-grooved wood slats design not only for wall covering and pole wraps but also for other usages such as Wooden Coasters, Rollable Menus, Cosmetic Cases, Decorative Placemats, Laptop Stands, Picture Frames, Storage Boxes, Plant Pot Holders, Jewelry Displays. 

Specification sheet of flexible wood panel boards

Wood Veneer top flexible wood slats wall panel board

Wood kinds:   Oak, Maple, Cherry, and MDF board

Size:  4 feet X 8 feet (1200 mm x 2400 mm)

Thickness:  3 mm

Flat slat by V-grooved:  13 mm, 43 mm, 67 mm and other widths for special orders

Structure:  Top Layer Wood veneer Middle Layer MDF board Bottom Layer ECO resin reinforced non-woven fabric backing or kraft paper

Usages:  Interior pole wraps and column covering, wood wall paneling, ceiling, furniture surface covers, flooring, wainscoting, Flexible wood panel boards, V-grooved flexible and rollable wood panel board,  wood slats design, flexible and rollable wood panel board, V-grooved rollable wood panel board, wall covering, wood panel board, Menus, Wooden Coasters, plant pot, Jewelry Displays, Storage Boxes, Picture Frames, Flexible Wall Art, Decorative Placemats, Cosmetic Cases, Wall covering

Origin:   Made in Taiwan

A general reference description of the working process for using the V-grooved flexible and rollable wood panel board to create the listed items::

 

Wooden Coasters made from V-grooved wood slats design wood panel board:

  1. 1. Measure and Mark: Measure and mark the desired size for the wooden coasters on the V-grooved wood panel board.
  2. 2. Cut: Use a simple knife or scissors to cut the V-grooved flexible wood panel board along the marked lines to create individual wooden coasters.
  3. 3. Sand and Finish: Sand the edges of the coasters made by V-grooved slats design wood panel board to smooth out any rough edges. Optionally, apply a protective finish to enhance the wood’s natural beauty and durability.
  4. 4. Use: Your custom wooden coasters made from flexible V-grooved wood slats design panel board are ready to use, adding a touch of elegance to your table setting.

Rollable Menus made from V-grooved wood slats design wood panel board:

  1. 1. Design Layout: Plan the layout of the menu content on the flexible V-grooved wood panel board.
  2. 2. Cut and Shape: Cut the flexible wood panel board into the desired size and shape for the rollable menu. Use a simple knife or scissors to create straight or curved edges.
  3. Add Content: Print or write the menu content on paper and attach it to the flexible wood panel board using adhesive or clips.
  4. Roll and Secure: Roll up the menu from the bottom, creating a rollable format. Secure the top edge with adhesive or a fastening mechanism.
  5. Display: Your rollable menu made from flexible V-grooved wood slats design panel board is now ready to be displayed in your restaurant or cafe, providing a unique and stylish presentation.

Cosmetic Cases made from V-grooved wood slats design wood panel board:

  1. Design and Measurements: Plan the design and dimensions of the cosmetic case compartments on the flexible V-grooved wood panel board.
  2. Cut and Shape: Cut the flexible V-grooved wood slats design panel board into the required pieces for the cosmetic case using a simple knife or scissors. Create dividers and compartments as needed.
  3. 3. Assembly: Assemble the cut pieces of the V-grooved wood slats design wood board to create the cosmetic case. Use adhesive to secure the components together.
  4. 4. Finish: Sand the edges and surfaces to ensure a smooth finish. Optionally, apply a protective coating or finish to enhance the wood’s appearance.
  5. 5. Organize: Your personalized cosmetic case made from flexible V-grooved wood slats design panel board is ready to organize and store your cosmetics and beauty products.

Please note that the working process may vary slightly depending on the specific design and requirements of each item. These descriptions provide a general overview of how the V-grooved flexible and rollable wood panel board can be utilized to create various functional and decorative items.

here’s a description of the working process for using the V-grooved flexible and rollable wood panel board to create the other items mentioned:

Decorative Placemats made from V-grooved wood slats design wood panel board:

  1. Measure and Cut: Measure and mark the desired size and shape of the placemats on the V-grooved wood panel board.
  2. Cut: Use a simple knife or scissors to cut along the marked lines and create individual placemats.
  3. Design and Decorate: Decorate the placemats by painting, staining, or adding decorative elements such as stencils or decals.
  4. Finish: Optionally, apply a clear protective finish to the placemats to ensure durability and ease of cleaning.
  5. Use: Place your decorative placemats made from flexible V-grooved wood slats design panel board on the dining table to add a personalized and stylish touch to your meals.

Flexible Wall Art made from V-grooved wood slats design wood panel board:

  1. Sketch Design: Plan and sketch the design for your flexible wall art on the V-grooved wood panel board.
  2. Cut and Shape: Use a simple knife or scissors to cut the wood panel board into the shapes required for your design.
  3. Assemble: Arrange the cut pieces according to your design and assemble them onto a backing board or directly onto the wall.
  4. Secure: Use adhesive or mounting hardware to secure the wood pieces in place on the wall.
  5. Display: Your flexible wall art made from flexible V-grooved wood slats design panel board is now ready to be displayed as a unique and dynamic decor element.

Laptop Stands made from V-grooved wood slats design wood panel board:

  1. 1. Design and Measurements: Determine the dimensions and design of your laptop stand on the V-grooved wood panel board.
  2. Cut and Shape: Cut the wood panel board into the required pieces for the laptop stand, including the base and support arms.
  3. Assembly: Assemble the cut pieces to create the laptop stand. Use adhesive or hardware to secure the components.
  4. Adjustable Angle: Create notches or slots in the support arms to allow for adjustable angles. This can be achieved by cutting V-shaped grooves on the arms.
  5. Finish: Optionally, sand the edges and surfaces for a smooth finish. Apply a protective finish if desired.
  6. Use: Place your laptop on the stand made from flexible V-grooved wood slats design panel board, adjusting the angle as needed for comfortable viewing and ergonomic use.

Picture Frames made from V-grooved wood slats design wood panel board:

  1. Measure and Cut: Measure and mark the desired size of the picture frame on the V-grooved wood panel board.
  2. Cut and Shape: Use a simple knife or scissors to cut the wood panel board into the frame shape, including the outer and inner edges.
  3. Assembly: Assemble the frame by attaching the cut pieces together at the corners using adhesive or small nails.
  4. Insert Photo: Place your photo or artwork in the frame and secure it with a backing board or adhesive.
  5. Hang or Display: Attach a hanging mechanism or display the picture frame made from flexible V-grooved wood slats design panel board on a tabletop or wall to showcase your photo or artwork.

working process for creating the items you mentioned using the V-grooved flexible and rollable wood panel board:

Storage Boxes made from V-grooved wood slats design wood panel board:

  1. Design and Measurements: Plan the dimensions and compartments of the storage box on the V-grooved wood panel board.
  2. Cut and Shape: Use a simple knife or scissors to cut the wood panel into the pieces required for the storage box. Consider the sides, base, and lid.
  3. Assembly: Assemble the storage box by attaching the sides and base together using adhesive or small nails. Create a removable or hinged lid if desired.
  4. Finish: Sand the edges and surfaces for a smooth finish. Optionally, apply a protective finish or paint for added durability and aesthetics.
  5. Organize: Your custom storage box made from flexible V-grooved wood slats design panel board is now ready to store and organize various items.

Plant Pot Holders made from V-grooved wood slats design wood panel board:

  1. Measure and Cut: Measure and mark the dimensions of the plant pot holder on the V-grooved wood panel board.
  2. Cut and Shape: Use a simple knife or scissors to cut the wood panel into the pieces required for the plant pot holder. Consider the base and support arms.
  3. Assembly: Assemble the cut pieces to create the holder. Attach the support arms to the base using adhesive or hardware.
  4. Adjustable Angles: Create notches or slots in the support arms to allow for adjustable angles. This can be achieved by cutting V-shaped grooves on the arms.
  5. Finish: Optionally, sand the edges and surfaces for a smooth finish. Apply a protective finish or paint to withstand exposure to water and soil.
  6. Use: Place your plant pot on the holder made from flexible V-grooved wood slats design panel board, adjusting the angle as needed for optimal sunlight and display.

Jewelry Displays made from V-grooved wood slats design wood panel board:

  1. Design Layout: Plan the layout of the jewelry display on the V-grooved wood panel board, considering compartments for necklaces, earrings, rings, etc.
  2. Cut and Shape: Cut the wood slats wood panel into the required size and shape for the jewelry display. Create compartments and dividers using V-grooves.
  3. Assembly: Assemble the cut pieces to create the display. Attach dividers and compartments using adhesive or small nails.
  4. Finish: Optionally, sand the edges and surfaces for a smooth finish. Apply a protective finish to enhance the wood’s appearance.
  5. Arrange Jewelry: Place your jewelry on the display made from flexible V-grooved wood slats design panel board, showcasing various pieces for easy selection.

Please note that the working process for each item may vary based on your specific design and requirements. These overviews provide a starting point for your creative endeavors.

These descriptions provide a general overview of the working process for creating various items using the V-grooved flexible and rollable wood panel board with wood slats design. Keep in mind that each item may have specific design considerations and variations in the process.

Key words: Wall covering, Flexible wood panel boards, V-grooved flexible and rollable wood panel board,  wood slats design, flexible and rollable wood panel board, V-grooved rollable wood panel board, wall covering, wood panel board, Menus, Wooden Coasters, plant pot, Jewelry Displays, Storage Boxes, Picture Frames, Flexible Wall Art, Decorative Placemats, Cosmetic Cases