2024-09-9
Flexible wood tambour board made of solid Red Oak wood can easy install with DIY for interior decoration
Specification sheet of flexible wood tambour boards
Flexible fluted Half-Round Solid wood or MDF Wood sticks wall Panel Board
Wood kinds: Solid Red Oak, MDF board
Size: 4 feet X 8 feet (1200 mm x 2400 mm)
Height: 6 mm
Half round stick: 18 mm width
Backing: ECO resin reinforced non-woven fabric backing
Origin: Made in Taiwan
Wood Veneer top flexible grooved wood slats wall panel board
Wood kinds: Oak, Maple, Cherry, and MDF board
Size: 4 feet X 8 feet (1200 mm x 2400 mm)
Thickness: 3 mm
Flat slat by V-grooved: 13 mm, 43 mm, 67 mm and other widths for special orders.
Structure: Top Layer Wood veneer Middle Layer MDF board Bottom Layer ECO resin reinforced non-woven fabric backing or kraft paper
Usages: Interior pole wraps and column covering, wood wall paneling, ceiling, furniture surface covers, drawer fronts, bar fronts, flooring, wainscoting, tambour doors, Flexible tambour sheet, Flexible wood tambour board, install by DIY, wooden tambour Boards, flexible wooden boards
Origin: Made in Taiwan
Flexible wood tambour board made of solid wood can easy install with DIY for interior decoration
Easy to install. Simply apply construction adhesive to the cloth backer on the back of Flexible wood tambour board and mount it to your surface. Use pin/finishing nails to hold it in place while the glue sets.
Each wood slat is hand-selected to ensure you receive the best quality wall Flexible wood tambour board.
Ready to stain, paint or clear coat.
Much easier to work with than most wood wall cladding. To install, simply apply construction adhesive to the back of the Flexible wood tambour board and mount it onto your surface. Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Made of solid Red Oak wood
Flexible wood tambour sheet can bend at slat joints to allow for curved applications with V-grooves slats line.
Use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Panel Size is 8′ high x 4′ x 3 mm in thick,
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood is ready to stain, paint or clear coating
Easy to install. Simply apply construction adhesive to the cloth backer on the back of Flexible wood tambour board and mount it to your surface. Use pin/finishing nails to hold it in place while the glue sets.
Key words: flexible wooden boards, wooden tambour Boards, wood slat, solid Red Oak wood, walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, tambour doors, Flexible tambour sheet, Flexible wood tambour board, wood tambour board, easy DIY, interior decoration, solid Red Oak wood, install by DIY, fluted half round wood panel board