Flexible wood panel boards (tambour boards) with fluted half round wood sticks design for curved reception desk or bar front and curved wall, pole decoration and office curved partition usages
Specification sheet of flexible wood panel boards (tambour boards)
Flexible fluted Half-Round Solid wood or MDF Wood sticks Tambour Panel Board
| Wood kinds | Solid Red Oak, MDF board |
| Size | Solid Red Oak-2 feet X 8 feet (600 mm x 2400 mm) MDF board-4 feet X 8 feet (1200 mm x 2400 mm) |
| Height | 6 mm |
| Half round stick | 18 mm width |
| Backing | ECO resin reinforced non-woven fabric backing |
| Origin | Taiwan |
Wood Veneer top flexible grooved wood slats tambour panel board
| Wood veneer kinds | Red Oak, Maple, Cherry or only use MDF board |
| Size | 4 feet X 8 feet (1200 mm x 2400 mm) |
| Thickness | 3 mm |
| Flat slat by V-grooved | 13 mm (43 mm, 67 mm and other widths available but need special orders) |
| Structure | top layer-wood veneer, middle layer-MDF board, bottom layer-ECO resin reinforced non-woven fabric backing or kraft paper |
| Usage | interior pole wraps and column covering, wood wall paneling, ceiling, furniture surface covers, flooring, wainscoting, flexible wood panel boards, tambour boards, half round sticks, curved bar front, curved wall, pole decoration. DIY, half round panels, curved reception desk, office curved partition, wood sticks, half-round solid wooden strips, Half Round MDF tambour Board, Half Round MDF tambour |
| Origin | Taiwan |
Flexible wood panel boards (tambour boards) for curved reception desk or bar front and curved wall, pole decoration and office curved partition usages
Use flexible wood panel boards (tambour boards) with fluted half round wood sticks design for curved reception desk or bar front, curved wall and pole decoration will be faster and easier by DIY.
Also could get more free designs by your own. For your reference, the information on building a bar front is as below.
First- you need to measure the size of the bar front to be covered.
Second- according to the measured size you can trimmed with fine tooth saw or cut length-wise with utility knife.
Third- you can glue on the back of the board and paste flexible wood panel boards (tambour boards) with fluted half round wood sticks design on the bar front.
In the past, this product was half-round solid wooden strips one by one hand-made spliced together. It is not only time-consuming but also costly.
The long and thin wood strips tend twist, shift and slide during/after cut or milled. It may cause a problem of prone to inconsistencies in alignment spacing and parallelism of the strips.
Now, our flexible wood panel boards (tambour boards) with fluted half round wood sticks design is in full sheet 4’ (width) x 8’ (height).
The key point is our full sheet flexible wood panel boards (tambour boards) with fluted half round wood sticks design is cheaper than the old product with strips one by one.
It not only can be used on bar fronts but also can be used on walls, partitions, wainscoting, pole/
Flexible Half-Round MDF Panel Board is used for interior wood panel, wall panel, wood wrap and basement post/pole/column cover & wrap by DIY.
It is easy installation with normal glue for upholstery by DIY.
column wraps, drawer fronts and tambour doors.
Please refer to our flexible wood panel boards (tambour boards) with fluted half round sticks design Code No. CY300-02 & CY300-01N
Key words: half round MDF tambour, flexible wood panel boards, tambour boards, half round sticks, curved bar front, curved wall, pole decoration. DIY, flexible wood panel, half round panels, curved reception desk, office curved partition, wood sticks, half-round solid wooden strips, wainscoting
