2024-09-13
Use grooved flexible and rollable wood panel board (Tambour board) to make a Tambour door:
Specification sheet of flexible and rollable wood panel boards (Tambour boards)
Flexible fluted Half-Round Solid wood or MDF Wood sticks wall Panel Board
Wood kinds: Solid Red Oak, MDF board
Size: 4 feet X 8 feet (1200 mm x 2400 mm)
Height: 6 mm
Half round stick: 18 mm width
Backing: ECO resin reinforced non-woven fabric backing
Origin: Made in Taiwan
Wood Veneer top flexible grooved wood slats wall panel board
Wood kinds: Oak, Maple, Cherry, and MDF board
Size: 4 feet X 8 feet (1200 mm x 2400 mm)
Thickness: 3 mm
Flat slat by V-grooved: 13 mm, 43 mm, 67 mm and other widths for special orders
Structure: Top Layer Wood veneer Middle Layer MDF board Bottom Layer ECO resin reinforced non-woven fabric backing or kraft paper
Usages: Interior pole wraps and column covering, wood wall paneling, ceiling, furniture surface covers, flooring, wainscoting, Tambour door, V-grooved flexible wood panel board, Tambour board, MDF board, wood veneer, Rollable wood panel board, flexible and rollable wood panel board, DIY
Origin: Made in Taiwan
The best Tambour boards, V-grooved Flexible wood panel boards in three layers, top in selected wood veneer, middle MDF board and back with textile support then V-grooved or fluted on the upper two layers for the flexible and rollable character and with wood slats design will be the best selection for this Tambour door material.
Flexible wood panel boards (Tambour boards) in three layers, with the top layer made of selected wood veneer, the middle layer made of MDF board, and the back supported with textile, are designed for enhanced flexibility, rollability and durability always the first choose for Tambour door making.
Flexible and rollable wood panel board (Tambour board) making a Tambour door:
Materials Needed:
- V-grooved flexible wood panel board (Tambour board)
- Tambour door track system (rollers and guides)
- Wood glue or adhesive
- Saw
- Measuring tape
- Screwdriver
- Sandpaper
- Finish (paint, stain, or varnish)
Steps:
- Measure and Cut: Measure the height and width of the opening where you want to install the Tambour door. Use a saw to cut the V-grooved flexible wood panel board (Tambour board) to the required dimensions. Make sure the cut edges are smooth.
- Prepare Track System: Install the Tambour door track system according to the manufacturer’s instructions. This will involve attaching the rollers and guides to the top and bottom of the opening.
- Apply Adhesive: Apply wood glue or adhesive to the backside of the V-grooved flexible wood panel board (Tambour board). Make sure to spread the adhesive evenly.
- Insert into Track: Carefully insert one end of the
- V-grooved flexible wood panel board (Tambour board) into the track system at the bottom of the opening. Gently bend the V-grooved flexible wood panel board (Tambour board) and guide it into the track at the top. Slowly slide the V-grooved flexible wood panel board (Tambour board) into the track, making sure it moves smoothly.
- Test and Adjust: Roll the Tambour door up and down a few times to test its movement. Make any necessary adjustments to ensure that the door operates smoothly within the track.
- Trim if Needed: If the V-grooved flexible wood panel board (Tambour board) is slightly wider than the opening, you may need to trim the sides using a saw to ensure a perfect fit.
- Finishing: Sand the edges and surfaces of the Tambour door to achieve a smooth finish. Apply your chosen finish, such as paint, stain, or varnish, according to the manufacturer’s instructions. Allow the finish to dry completely before proceeding.
- Final Installation: Once the finish is dry, carefully slide the Tambour door back into the track system. Ensure that it moves freely and smoothly along the track.
- Hardware Installation: Depending on the design, you may need to attach handles or knobs to the Tambour door for easy operation.
- Test and Adjust Again: Roll the Tambour door up and down several times to ensure that it operates smoothly. Make any final adjustments as needed.
Congratulations, you’ve successfully created a Tambour door using the V-grooved flexible and rollable wood panel board (Tambour board).
Key words: Tambour door, V-grooved flexible wood panel board, Tambour board, MDF board, wood veneer, Rollable wood panel board, flexible and rollable wood panel board, DIY